Ningbo Wanma Plastics Co.,Ltd
Call us on:+86-13306535333   E-mail:
Home > News > Content
The Device Of The Fuel Tank
Ningbo Wanma Plastics Co.,Ltd | Updated: Oct 26, 2017

Hydraulic oil tank in the hydraulic system of the meter pump, mainly for storage, cooling, separation of oil contained in the air and eliminate foam. Choose the tank first to consider its capacity, general mobile equipment to pump the maximum flow of $number times, the fixed equipment takes the $number times, secondly considers the fuel tank oil level, when the system all hydraulic oil cylinder extends out after the fuel tank oil surface must not be lower than the lowest oil level, when the oil cylinder retraction after the oil surface may not be higher than the highest oil level;Fuel Tank 

Finally, consider the fuel tank structure, The traditional tank is not able to precipitate the role of dirt, should be along the oil tank longitudinal axis installation of a vertical clapboard, this partition one end and the fuel tank end plate between the space between the two sides to connect the partition, the hydraulic pump in and out of the oil port is arranged on both sides of the barrier, so that the distance between the oil and back to the farthest, the hydraulic oil tank more than a few heat dissipation effect.Fuel Tank

The side-type fuel tank is the hydraulic pump and other devices installed in the tank next to the area, although large, but installation and maintenance is very convenient, usually in the system flow and tank capacity is large, especially when a fuel tank for more than one hydraulic pump for the use of oil. The oil level of the side-type fuel tank is higher than that of the hydraulic pump, so it has good oil absorption effect.Fuel Tank

The fuel tank is often filled with petrol, minimizing the amount of air in the tank to reduce gum production. Avoid in the vehicle fuel tank to go to refuel, especially in the area of large humidity, tank wall is very easy to accumulate water vapor, causing corrosion, and fuel tank bottom gasoline pump will also lose its role. If possible, it's best to fill up the oil before you go home at night, which will reduce the air vapor when the tank cools down at night.Fuel Tank

Welding Tank Safety method, the use of welding tank explosion-proof agent in view of the Society for welding fuel tank irregularities, caused the concern of the social technical personnel, because the general welding tank method is dangerous, endanger the life of the staff, so the social welding fuel tank work has gradually disappeared. People can only give up welding this money-saving, quick way, instead of choosing to replace the new fuel tank time and money. Welding tank explosion-proof agent. The use of this product welding tank technology easy to master, quick, easy to operate, low-cost, substantial benefits.Fuel Tank

Product Categories

Fast Track

Copyright © Ningbo Wanma Plastics Co.,Ltd